1. Important Safety Instructions
Please read these Important Safety Instructions and the charging instructions in your
vehicle owner’s manual before charging your electric vehicle. Failure to do so can result
in death or serious injury. Save this user guide for future reference. There are many
safety features built into the charger. Read all the safety information and warnings in
this guide to be aware of any hazards and risks associated with using this device.
When using electric products, basic precautions should always be followed, including
the following. This manual contains important instructions that shall be followed
during installation, operation and maintenance of the unit.
• Do not install or use the device near flammable, explosive, harsh, or combustible
materials, chemicals, or vapors.
• Turn off input power at the circuit breaker before cleaning the device.
• The device is designed only for vehicles that are compatible with the SAE J1772
Level 2 charging standard.
• Do not use the device if it is defective, appears cracked, frayed, broken or otherwise
damaged, or fails to operate.
• Do not attempt to open, disassemble, repair, tamper with, or modify the device. The
device is not user serviceable. Contact our Customer Service for any repairs.
• Do not use the device when either you, the vehicle, or the device is exposed to
severe rain, snow, electrical storm or other severe weather.
• When transporting the device, handle with care and do not subject it to strong
force, drag or step on the device.
• Do not touch the charger end terminals with sharp metallic objects.
• Do not forcefully pull the charge cable or damage it with sharp objects.
• Do not put fingers or insert foreign objects into any part of the charging vehicle
connector.
• Using with a worn or damaged AC outlet may cause burns or start a fire.
• Risk of explosion. This device has arcing or sparking parts that should not be
exposed to flammable vapors.
• Risk of electric shock. Do not remove cover or attempt to open the enclosure of the
device. No user serviceable parts inside. Refer servicing to qualified service
personnel.
To reduce the risk of fire, connect only to a circuit provided with 40 amperes maximum
branch circuit overcurrent protection in accordance with the National Electrical Code,
ANSI/NFPA 70, and the Canadian Electrical Code, Part I, C22.1.
1
