ASSEMBLY INSTRUCTIONS
Figure 9
8. Cover the heater with the outdoor weather cover (G) when not in use
to protect it from the elements or when heater is cool COMPLETELY
after the use (See Figure 9).
G
Figure 8
7. Place the gas cylinder into the cylinder holder. Secure the cylinder
by tightening clockwise the retention point found on the cylinder
holder, so that the cylinder cannot move from side to side or fall down.
Connect the regulator, screw the black handle clockwise to tighten,
turn the black handle counterclockwise to remove. The knob on the
control panel is turned all the way to the “OFF” position when the fire
pit is NOT in use (See Figure 8).
retention point
regulator
E
E
F
11
LIFE GETS BETTER WITH PHI VILLA
