14
INCUBATOR COMPONENTS
LCD touch panel
The following display (called the Top screen) will appear when the power switch is turned ON.
Note:
It takes approximately 20 seconds until the Top screen is displayed. During warming-up, “Status:
Gas sensor initializing” is displayed in the Message display field (
13
), and “--.-” is displayed in the present
CO
2
density display field (
4
).
2 6
7 8
3
1
1. Present temperature display field
The current chamber temperature is displayed.
2. Set temperature value display field
The set value of chamber temperature is
displayed. Default setting: 37
o
C
3. Heating indicator
This lights up when the heater is on.
4. Present CO
2
density display field
The current chamber CO
2
density is displayed.
Nothing is displayed when CO
2
density is set to
0 %.
5. Set CO
2
density value display field
The set value of the chamber CO
2
density is
displayed. Default setting: 0 %.
6. CO
2
gas injection indicator
This lights up when CO
2
gas is being injected.
7. CO
2
gas supply line indicator A and B*
Current supplying CO
2
gas supply line
(connecting port for CO
2
gas pipe) is displayed.
When the CO
2
gas automatic changer function
changes the empty CO
2
gas cylinder to the
other, the empty indicator is displayed in reverse
video and blinks.
8. CO
2
gas supply line select key*
This key selects CO
2
gas supply line A or B
(connecting port A or B for CO
2
gas pipe). When
an optional gas auto-changer MCO-21GC is
installed, CO
2
gas supply line A/B changes over
automatically when CO
2
gas cylinder is empty.
* Only displayed when optional component MCO-21GC (gas auto-changer) is installed.
5
4