iii |
P a g e
SAFETY MESSAGES AND WARNINGS
To ensure safe and reliable operation of the Phase Connect system, it is important to
carefully read this manual and to observe all warning labels attached to the unit before
installing. Please follow all instructions exactly and keep this manual with the unit for quick
and easy reference.
Definitions of Warning Signs and Symbols
CAUTION:
Indicates a potentially hazardous situation that could result in injury or
damage to the product.
WARNING:
Indicates a potentially hazardous situation that could result in serious
injury or death.
HIGH VOLTAGE:
The voltage associated with the procedures referenced could
result in serious injury or death. Use caution and follow instructions carefully.
READ THESE WARNINGS BEFORE INSTALLING
OR OPERATING EQUIPMENT!
WARNING:
Risk of electric shock. De-energize the unit by disconnecting all incoming
sources of power, before servicing the equipment.
HIGH VOLTAGE:
This equipment is connected to line voltages that can create a
potentially hazardous situation. Electric shock could result in serious injury or death. This
device should be installed only by trained, licensed, and qualified personnel. Follow
instructions carefully and observe all warnings.
WARNING:
Installation of this equipment must comply with the National Electrical
Code (NEC) and all applicable local codes. Failure to observe and comply with these codes
could result in risk of electric shock, fire, or damage to the equipment.
CAUTION:
Circuit breakers, fuses, proper ground circuits, and other safety equipment
and their proper installation are not provided by Phase Technologies, LLC, and are the
responsibility of the end user.
WARNING:
Input power connections
should be made by a qualified electrician into
circuit with adequate voltage and current carrying capacity for the model.
CAUTION
: Use 600 V vinyl-sheathed wire or equivalent. The voltage drop of the leads
needs to be considered in determining wire size. Voltage drop is dependent on wire length
and gauge. Use only copper conductors.
CAUTION:
Secure wires to terminal blocks and torque to value be listed in
CAUTION:
Never allow bare wire to contact metal surfaces.
