14
Step 1. Fob Overview
Before you can use your fob it must be paired with its controller. Please see step 3
for details.
Start/Stop
Press once to stop
pump. Whole LED
segment lights to
indicate STP.
Controller will show
‘StP’. Press once to
start pump.
One LED lights to
indicate pump has
started.
Specification
Value
Supply Voltage*
Enclosure Material
Water Resistance
Dimensions
Working Temperature
5 VDC
ABS
IP61
75 x 16mm
0
o
to 40
o
C
Pump Decrease
Each press will
reduce pump flow
by 10.
LED segments
indicate this.
Auto-Calibrate
Press and hold
until whole LED
segment lights.
One LED lights to
indicate
calibration has
finished.
Pump Increase
Each press will
increase pump
flow by 10.
LED segments
indicate this.
DISCLAIMER
THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES TO ANY PRODUCT HEREIN TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN. THE MANUFACTURER DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE
APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN.
* Charge only with micro USB phone chargers or similar micro USB adaptors.
Fob Overview