Phantom Miro C110, Manual

Page: 24 / 44

18
Phantom Miro C110 Camera Manual
The red ‘Capture’ button changes to ‘Abort Recording’ and
the green ‘Trigger’ button is enabled when the camera is
recording. The Abort Recording button instructs the
camera to stop recording, leaving the camera’s RAM
empty.
Selecting the ‘Trigger’ button instructs the camera to
immediately stop recording when the ‘Trigger Position’ is
set to zero. If a value greater than zero is set, the camera
will continue to record ‘post-trigger’ frames until the user
specified value is met.
Using an external trigger signal provides a more accurate
trigger to the camera.
Triggering the Camera
Once the camera has completed recording a Cine in the
camera’s RAM it can be reviewed by selecting it from the
‘Cine’ pull-down selection list in the PCC ‘Play’ tab.
Reviewing a Cine
A previously saved Cine stored on the computer’s
hard drive can be opened using the ‘Open File’
toolbar button (also places the file under the
‘Cines’ group folder in the Manager tab).
The viewing option can be changed via the ‘Play Speed
& Options’ and the Cines’ metadata can be viewed in the
‘Frame Info’ and ‘Cine Info’ sections.
If a clip exists in the camera’s memory, you will
be asked if you are sure you wish to delete it
before continuing. If yes, click ‘Delete cine(s) and
start new recording’.