Phantom Miro C110, Manual

Page: 28 / 44

22
Phantom Miro C110 Camera Manual
To convert a cine clip into a sequence of images (frames)
you must add one of the following annotations to the
end of the file name: ‘!n’ or ‘+n (where n is the number
between 1 to 8). This will assign the sequential frame
numbers to the file name for each frame being created.
Example: image_!5.tif
The ‘!’ annotator instructs the software to append the
cine’s image number (relative to the trigger point) to
the file name. If the first frame in the clip is - 100,
then the first converted frame will have the name:
image_-00100.tif.
The ‘+’ annotator will add frame numbers starting at 1.
Example: 5.tif
This will cause the first converted frame to have the name:
image_00001.tif
The ‘Batch Convert Files’ toolbar button can be used to
convert a single, or multiple saved cine files into any one
of the supported file formats.
Use the shift and/or control keys, to select the cine files
you wish to convert in the ‘Open Cine’ dialogue window,
then click the ‘Open’ button.
Navigate to the destination folder, in the ‘Multifile Convert
Destination’ dialogue window, and select the file format.
The ‘File Name’ will depend on the type of file format you
are converting to.
If you are converting the cine file into a ‘movie-like’
formats leave the file name as ‘All selected file.’ The
software automatically assigns the original file name
to the converted file and appends the appropriate file
extension.
Batch Convert
Ensure all image adjustments have been applied
prior to initiating the conversion process. All
metadata (gain, gamma, saturation, etc.) will
be embedded into the converted images.