background image

26

Follow the current local regulations governing environmental protection to recycle or dispose of electrical 

equipment at the end of its useful life.

PHACON GmbH

Karl-Heine-Str. 15 

04229 Leipzig 

Germany

Tel.: + 49 (0)3 41  47 83 97 35 

e-mail: [email protected] 

www.phacon.de

Store the equipment within the specified environmental condition value(s) throughout its useful life. See the 

Specifications section. To ensure the longevity, performance and safety of this equipment, use the original 

packaging materials when transporting this equipment.

STORAGE AND HANDLING

RECYCLING

SUPPORT

MESSAGE

CAUSE

ACTION

The LOGIN password or user name 

is/are incorrect.

Enter correct LOGIN password or user 

name. Pay attention to case sensitivity.

The group name field was left empty. 

Please enter a unique group name.

The required field data was not provided.

Enter a group name (maximum of 150 

characters).

The entered group name already exists 

in the trainer. Please enter a unique 

group name.

The entered group name is already used.

Enter a new group name into the trainer

(maximum of 150 characters).

A maximum of 150 characters is allowed.

The entered group name consists of 

more than 150 characters.

Enter a group name with a maximum of 

150 characters.

The instrument or patient calibration 

failed.

Recalibrate the instrument or patient or 

use the classic. 

The calibration was not successful.

In the setup menu:

No camera found.

The camera is not connected to the 

notebook.

Make sure the camera is connected to

the notebook and click on TEST CONNECTION.

No camera found.

The camera is not connected to the 

notebook.

Make sure the camera is connected to

the notebook and click on TEST 

CONNECTION.

The LOGIN password or user name 

is/are incorrect. Please try again.

ERROR MESSAGES

Connection to trainer lost.

The USB cable of the skull is not

connected to the notebook.

Make sure the USB cable connection

between the skull and the notebook is secure. 

Press the RECONNECT button.

Summary of Contents for SINUS TRAINER

































Reviews: