A
B
Overhead Rigging:
The installation must be carried out by a qualified engineer only. Improper installation can result in injuries or
damage to property. Overhead rigging requires experience. Working loads should be a heard to, certified
materials should be used. The installed device should be regularly inspected for safety.
• Make sure the working area is clear from people and obstructions during rigging, de rigging and servicing.
• Locate the smoke machine in a well ventilated area away from flammable materials and liquids. The smoke
machine needs to be 50cm away from surrounding walls and fixtures.
• The smoke machine should be installed out of reach of people and not where people are seated, walking or
standing.
• When mounting make sure the installation point can take the weight.
• Make sure a safety chain or wire is always used and can take the weight of the smoke machine.
• The smoke machine should be well fixed and free from swinging.
• Do not cover any ventilation holes.
• The smoke machine must not be powered when it is not to be use for an event.
• The operator must make sure the smoke machine has been installed correctly to all the necessary
guidelines before each use. The installation should be inspected every 6 months.
If you want to hang the PFX1600V upside down the fog liquid container needs to be moved.
• Remove the 2 screws holder the top plate of the fluid container.
• Remove the cap and tube for the liquid container.
• Remove the liquid container.
• Turn the machine upside down.
• Remove the base plate. (A)
• Turn the machine again to its normal position. Put the base plate this side.
• Turn the machine upside down again.
• Install the liquid container back inside.
• Install the top plate back on.
• Hang the smoke machine via the 3 M10 fixing points, either with clamps, eye bolts or stud. (B)
• Make sure you use a safety chain or wire.
