• Press ENTER on the desired setting either R,G,B or MACo
• Use the UP and DOWN buttons to set the desired setting
• Press ENTER
NoFU:
Turns the low fluid function on and off. When the machine is low on fluid the display will flash. It is a good
ideal to leave this function ON(yes) as low fluid in the tank can damage the pump. Press ENTER and use the
UP and DOWN to select yes or no, then press ENTER again.
AuHC:
Wireless control options for the straight row of LEDs. Here you have you can select what colour macro is
activated by what button on the hand held remote control. These settings control what colour the LEDS are
on the straight group of LEDs, when a particular button is pressed on the 8 button hand remote.
b-01 to b-08 represent a button on the remote control.
AC00 to AC07 represent a colour along the straight line group of LEDs.
AC00=No LED Output
AC01=Red
AC02=Yellow
AC03=Green
AC04=Light Blue
AC05=Blue
AC06=Pink
AC07=White
• Press MENU button until AuHC is displayed.
• Press the ENTER button to enter this sub menu.
• Choose what button on the remote you wish to set by using the up and down buttons. (B-01 to b-08)
• Pres the ENTER button.
• Select one of the static colours AC00 to AC07.
• Press ENTER.
• Repeat Steps 3 to 6 until you have set all 8 buttons.
First Time Operation with the Manual Red Push Button:
• Before you start using this unit, please check there is no transportation damage, should there be any, please
do not use the device and contact your dealer immediately.
• The PFX1600V is designed to be used with water based smoke, fog or vapour liquid.
• Put the smoke machine on a flat stable surface or truss mount following the instructions in this manual
carefully. Make sure no one can put any body part close to the heater output.
• Unscrew the Lid on the fluid bottle, fill up with a suitable fog liquid, do not to overfill. Screw the plastic cap
back on and ensure the tank never runs dry during operation.
• Plug the mains plug into a suitable mains supply. Allow the unit to warm up for around 4 minutes.
• Adjust the settings in the menu display to produce the colours required. The circle row of LEDs can be
colour mixed to make what colour you want. Preset colours can only be selected for the straight line group of
LEDs. See SET UP MENU section above for how to change the colour settings.
• Once the smoke machine is heated, push the red push button on the back of the smoke machine to output
smoke and the LED colours.
First Time Operation with Wireless Remote:
• Before you start using this unit, please check there is no transportation damage, should there be any, please
do not use the device and contact your dealer immediately.
• The PFX1600V is designed to be used with water based smoke, fog or vapour liquid.
• Put the smoke machine on a flat stable surface or truss mount following the instructions in this manual
carefully. Make sure no one can put any body part close to the heater output.
• Unscrew the Lid on the fluid bottle, fill up with a suitable fog liquid, do not to overfill. Screw the plastic cap
back on and ensure the tank never runs dry during operation.
• The wireless remote can be used up to 25 metres. Plug the receiver into the back of the smoke machine
labelled remote control.