Description:
The PFX1600V is a powerful vertical smoke machine that can be used on the floor or hung upside down from
trussing. Internal lights add to the effect and add to the dramatic effect of the machine. Manual, remote or
DMX control will allow you to easily get the best from the machine.
1.
Heater Nozzle:
Smoke output, this will get very hot in operation -
do not touch.
2.
Fluid Tank:
Fill the fluid tank with standard fog liquid, do not spill the liquid as this could damage the
electronics.
3.
DMX Input:
Female 3 pin used to connect from a DMX controller or previous DMX fixture
4.
DMX Output:
Male 3 pin used to connect to next DMX fixture in the chain.
5.
Power Switch:
Used to turn the smoke machine on and off.
6.
Fuse Holder:
If this blows once, replace if the correct size fuse, if it blows again, there may be a problem
with the machine, seek professional help from an engineer.
7.
Mains Lead:
Connect this to a suitable mains supply.
8.
Remote Control:
For connection of the wireless receiver.
9.
Menu Button:
used to browse the setup menu.
10.
Up Button:
Used to adjust setting in the menu.
11.
Down Button:
Used to adjust setting in the menu
12.
Enter Button:
Used enter sub menus in the menu.
13.
Eye Bolt:
For connecting a safety wire or chain.
14.
RGB LEDs:
Light up when fog is outputted.
15.
Manual control button.
❶
⓮
❺ ❻ ❼
❹ ❸ ❾ ❿
⓭
⓫
⓬
⓯
❽
❷
