Set Up Menu:
The setup menu is used to adjust the different parameters of the smoke machine.
The MENU button is used to navigate through the menu options.
Addr:
Press MENU until Addr is displayed, press ENTER use the up and down buttons to adjust selection of 6 or 9
channel mode, press ENTER, use the up and down buttons to set the DMX address required.
rENo:
Wireless control options for circle row of LEDs
Here you have you can select what colour or programme is activated by what button on the hand held remote
control. These settings control what colour the LEDS are around the nozzle, when a particular button is
pressed on the 8 button hand remote.
b-01 to b-08 represent a button on the remote control.
Co 0 to Co 7 represent a colour around the output nozzle.
Co 0=No LED Output
Co 1=Red
Co 2=Yellow
Co 3=Green
Co 4=Light Blue
Co 5=Blue
Co 6=Pink
Co 7=White
Pr 1 To Pr 4 Represents a programme around the output nozzle
• Press MENU button until rENo is displayed.
• Press the ENTER button to enter this sub menu.
• Choose what button on the remote you wish to set by using the up and down buttons. (B-01 to b-08)
• Press the ENTER button.
• Select one of the static colours Co 1 to Co 7 or a programme Pr 1 to Pr 4.
• Press ENTER.
• Repeat Steps 3 to 6 until you have set all 8 buttons.
CuSt:
Manual Setup Button
Set what colour you wish both groups of LEDS to be. When using the manual push button the back of the
smoke machine.
• Press the MENU button until CuSt is displayed.
• Press ENTER button.
• Use the UP and DOWN buttons to move through this sub menu. Here there are 4 settings.
• R- This setting controls how much red is produced around the nozzle, this can be set from 0-255
• G- This setting controls how much green is produced around the nozzle, this can be set from 0-255
• B- This setting controls how much blue is produced around the nozzle, this can be set from 0-255
• A mixture of R,G,B can be used to create the desired colour.
• MACo:
This controls what colour is produced on the straight line group of LEDs this can be set from C 0-7. These are
only preset macros, so you cannot colour mix the straight line LEDs.
C 0=No LED Output
C 1=Red
C 2=Yellow
C 3=Green
C 4=Light Blue
C 5=Blue
C 6=Pink
C 7=White
