PFT Conveying Pump ZP 3 XL MIX Part 2 Overview – Operation - Spare Parts Lists
Preparation
20
Fehler! Formatvorlage nicht definiert.
7 Preparation
7.1 Erecting the Machine
Prior to machine operation, carry out the following preparatory steps
of work:
Fig. 17: Injury danger
Danger!
Rotating Pump Shaft!
You risk injuring yourself if you touch inside the
material container.
Therefore:
During machine preparation and
operation, the cover grating may not be
removed
Never touch inside the running machine
Fig. 18: Erecting
Set up machine by means of the telescopic tube support to stand in a
stable manner on a level surface and secure it against unintentional
movement:
If necessary, use pads when the support foot (1) is used so that the
machine does not sink during operation.
Set up the machine so that it cannot be hit by any falling
object.
Operating elements must be accessible freely
7.2 Switch Cabinet Preparation
Fig. 19: Power connection
DANGER!
Life Hazard by Electric Current!
The connected power must be protected
properly:
Only connect the machine to a power source
with a permissible FI protection switch (30 mA)
RCD (Residual Current Operated Device) type
A.
Fig. 20: Connect vibrator and air
compressor together
When working with lime- or clay plaster:
Check whether the vibrator is connected
