EN – 12
Disassembling the
pumping module
with
no flanged stator
(see
N –
6)
1
Remove the HP stator (
34
) by sliding it
along the HP rotor (
31
).
Remove the HP rotor and the vanes.
2
Insert two screwdrivers in the notches
and release the central plate (
29
) in the
axis.
3
Insert two screwdrivers in the notches
and release the BP stator (
26
) by sliding
it along the BP rotor (
23
).
Remove the BP rotor and the vanes.
4
Release the front plate (
19
).
31
34
23
26
29
19
Note :
If one of the pumping module part with no flanged stator is damaged and
must be replaced, it is necessary to replace it by new parts from a flanged stator
configuration (
refer to N - 21, N - 23 for spare part list
).
Disassembling the pump (cont’d)
