EN – 4
Tools and consumable products
Overhaul kit
Seal kit
This kit contains all the seals on the pump which must be replaced at each complete
disassembly.
Pumps
1005
1015
2005
2010
2015
2021
I
–
105515
103912
SD / SDI
103911
105515
103911
C1
104975
C2
–
104975
Keep this kit in a dry place, away from heat and light (sunlight and ultraviolet light),
in order to prevent any hardening of the elastomers (see AFNOR standards: “storage
conditions for vulcanized elastomer based products” - FD T.46 022).
Special precautions
Read the safety instructions at the beginning of the maintenance chapter.
Before disassembling the pump, drain it (
see Operating instructions
).
All the seals and faulty parts should be replaced: provide a seal kit or an
overhaul kit.
Spare parts
In addition to the seal kit, this kit contains a set of spare parts to perform overhaul on
the pump for a two year period, under normal operating conditions.
Pumps
1005
1015
2005
2010
2015
2021
I
–
104643
103906
103907
103908
103909
SD / SDI *
104622
104643
103902
103903
103904
103905
C1
104617
104619
104976
104977
104978
104979
C2
–
–
104614
104615
104616
* For SDI pump with no flanged stator, use a major kit P/N 108308.
The pumps are equipped with :
• a
shouldered not chromed ring
(
36
) for I, SD and SDI models with serial number
< AM656245
• a
shouldered chromed ring
(
36
) for I, SD and SDI models with serial number
≥
AM656245
• a
shouldered chromed ring
(
36
) for C1 and C2 models.
The
shouldered not chromed ring
is a spare part that must be replaced with a
chromed ring.
The
shouldered chromed ring
needn’t systematically to be changed.
For fasted service, specify the following when ordering:
- Pump type.
- Serial number (on pump label).
- Part number (see list at end of operating instructions).
Overhaul kits containing the most frequently used parts are always available at our sales
outlets. Be sure to use these kits so you will have all the parts necessary.