English
Scissors-lift trolleys
F06.08.031
technische Änderungen vorbehalten
design changes under reserve
changements techniques sous réserve
Seite / page 8
Safety instructions
Operation, assembly and maintenance only by:
Instructed, qualified operators
(Definition of qualified operators in accordance with IEC 364)
Qualified operators are persons who, on the basis of their training, experience, instruction and knowledge of the
relevant standards and regulations, regulations for prevention of accidents and operating conditions, are
authorised by the persons responsible for the safety of the plant to carry out the respective required tasks whilst
being able to recognise and prevent potential associated dangers.
–
Operation is only permitted on a level and firm floor/ground surface.
–
The scissors-lift trolley must not be used on upward or downward slopes.
–
Transporting of persons and a presence within the danger zone is not permitted.
–
A presence under a raised load is not permitted.
–
The specified load capacity must not be exceeded.
–
The loaded material must be distributed evenly on the platform.
–
The load must be evenly distributed across the platform.
–
The scissors-lift trolley must never be loaded whilst the platform is in a raised position.
–
Travel with load only in lowest possible position.
–
Never leave the load unattended in a raised position.
–
Never reach into moving parts.
–
Defects are to be dealt with competently as soon as they become apparent.
–
Only use genuine spare parts.
Inspections
In accordance with Section 37 of the regulations BGV D27, the scissors-lift trolley must be
inspected by a competent technical expert at least once per year, and otherwise as required.
We recommend that you record the results of the inspections in an inspection book.
Technical data and dimensions
Type description
HX 150
HX 300
HX 500
HX 750
HX D 350
Art. No.
034600020
034600021
034600022 034600023
034600024
Lifting capacity
[kg]
150 300 500 750 350
Net weight
[kg]
49 78 82 120 136
Steering- / load wheels *
[mm]
PUR/PUR * PUR/PUR * PUR/PUR * PUR/PUR * PUR/PUR *
Steering wheel size - front
[mm]
100 x 36
128 x 40
128 x 40
147 x 50
128 x 40
Load wheel size - rear
[mm]
100 x 36
128 x 40
128 x 40
147 x 50
128 x 40
Total no. of steering- /load wheels
2/2 2/2 2/2 2/2 2/2
Lift per pump stroke
[mm]
27 31 31 15
Suitable for ambient temperature
-10°C +40°C
* Polyurethane (PUR)
Functional description
The scissors-lift truck has a hydraulic lift mechanism with a lifting cylinder, pump unit, return check valve, pressure
control valve, lowering valve and descent braking valve.
Use the foot pedal to raise the load.
The built-in lowering valve gives you precision control when you are lowering the load.
The return check valve holds the load in any position.
The roller brake prevents unintentional movement.
The descent braking valve limits lowering speed.