Adjustment
35
000
023
Sewing area size X [1/10 mm]
± 33
-23 / +23
To avoid mechanical collisions, the
sewing area size of the button clamp
in use is entered. The control unit
checks the path and, if necessary,
issues an error message.
024
Sewing area size Y [1/10 mm]
± 33
-23 / +23
To avoid mechanical collisions, the
sewing area size of the button clamp
in use is entered. The control unit
checks the path and, if necessary,
issues an error message.
025
Thread wiper solenoid
operating time [10 ms]
5 – 100
10
The time, for which the solenoid is
under full current, is entered.
026
Thread wiper solenoid Duty-cycle [%]
5 – 100
100
Thread wiper solenoid, ratio on-time to
off-time in % (Duty-Cycle)
027
Basic position/loading point = zero point
ON - OFF
OFF
100
101
Software version main processor
0300.xxx
The software version of the main
processor is displayed
102
Software version sewing drive unit
V.xx
The software version of the sewing
drive module is displayed.
103
Software version control panel
V.xxx/ H.xxx
The soft- and hardware version of the
control panel are displayed.
200
201
Program number
50 - 99
50
The program number of the program
to be processed is selected.
202
Button hole model
2 – 4
2
The button hole model (number of
holes in the button) is selected.
203
Coordinates of the first hole
xx.yy
The coordinates of the hole are entered.
204
Coordinates of the second hole
xx.yy
205
Coordinates of the third hole
xx.yy
206
Coordinates of the fourth hole
xx.yy
Group
Parameter
Description
Setting
Set value
range