Pfaff 3108-1/1306, Instruction Manual, Page: 77 / 94

77
Adjustment
Group P
arameter
Description S
et
ting range
S
et value
500
502 Trimming speed (set value x 100 ) 5 - 25 2
503 Speed during bobbin winding 2 - 28 15
505 Time for wiper [in 10ms] 1 - 50 30
600
601 Display inputs
With this function the digital inputs can be che-
cked. "IN" shows the input numbers (1 - 16). Under
"VAL" the respective switch status is displayed.
IN VAL
1 SMREF 1
2 SMREF 2
3 IN 1 , programmable input 1
4 IN 1 , programmable input 2
5 Treadle switch
6 - 16 free
602 Display special inputs
IN VAL
PED Pedal (speed control unit –
1 , 0 ,+ 1 ,+ 2 )
603 Connect outputs
With this function the outlets can be connected.
"OUT" shows the outlet selected (1-16). Under
"VAL" the selected output is set (S) with the
plus/minus key (+), and reset (R) with the
plus/minus key. Interlocks are checked. Non-assi-
gned outlets are not connected.
OUT VAL
1 S/R
2 S/R
3 S/R clamp 1 closed
4 S/R Thread wedeler on (optional)
5 S/R
6 S/R clamp 1 open
7 S/R clamp 2 open
8 S/R thread trimming on
9 S/R Thread tension open
10 S/R Secondary thread tension open
(Progr. output 4 )
11 S/R Foot open
12 S/R Thread clamp closed
13 S/R clamp 2 closed
14 S/R 2 nd level jumper foot on
(Progr. output 3 )
15 S/R Progr. output 1
16 S/R Progr. output 2