Pfaff 3108-1/1306, Instruction Manual, Page: 25 / 94

25
Setting up
Fig. 9 -02
4
5
3
6
7
1
2
●
Draw the thread from the reel stand through guide hole 1 into the bobbin winder tension
unit 2 and then behind the thread clamp 3 .
●
Cut off the thread in thread clamp 3 . The thread is retained.
●
Place empty bobbin 4 on the bobbin winder spindle 5 .
●
To switch on the bobbin winder, push up lever 6 .
The bobbin is wound during sewing.
●
The bobbin winder stops automatically, when the bobbin 4 is fi lled suffi ciently.
●
Remove full bobbin 4 and cut off the thread in thread clamp 3 .
●
The tension of the thread on bobbin 4 can be adjusted on the bobbin winder tension unit
2 .
●
The volume of thread on bobbin 4 can be adjusted with screw 7 .
●
If separate winding is required, proceed as follows:
●
Call up bobbin winding function.
●
Start the winding function using the treadle or the sewing start button.
9
.02
Winding the bobbin thread, regulating the winder tension