24
Setting up
Fig. 9 - 01
1
2
●
Switch on the machine.
●
Call up the threading aid function.
Machine moves to thread-in position, sewing start is disengaged.
(when clamping with obstacles, the clamp must be pushed manually into thread-in posi-
tion).
●
Loosen screw
1
and insert needle
2
as far as possible into the needle bar.
●
Adjust needle
2
so that the long needle groove is pointing in the direction of the top
cover of the sewing head, and tighten screw
1
.
●
Move the machine to its basic position
9 Preparation
All regulations and instructions in this Instruction Manual are to be observed!
Special attention is to be paid to the safety regulations!
All preparation work is only to be carried out by appropriately trained personnel!
9
.01
Inserting the needle
Only use needles from the sys-
tem intended for the machine,
see Chapter
3
Specifi cations.
Summary of Contents for 3108-1/1306
