Mounting and commissioning the machine
8 - 5
81-092
Mounting the start inhibitor
●
For machines delivered without a table, the plate
1
from the accessories should be
mounted under the table top, so that the switch lug
2
is resting on plate
1
when the
sewing head is in an upright position.
●
After loosing the screws
4
, adjust switch
3
so that the switch is off when the sewing head
is tilted over and activated by switch lug
2
when the sewing head is upright.
Checking the start inhibitor
8
.04
Mounting/checking the start inhibitor
Fig. 8 - 07
●
Switch the machine on at the main switch and tilt it over.
The error message "E009" must appear on the control panel.
●
If the message does not appear, check the setting of switch
3
.
●
Set the sewing head upright and acknowledge the error message by pressing the
TE/
Speed
key. The machine is ready for operation again.
E009
PRESS TE-SPEED
ERROR
2
3
4
81-093
1
Summary of Contents for 2438 plusline
