Pfaff 2438 plusline, Instruction Manual, Page: 17 / 118

Controls
7 - 3
81
-105
Fig. 7 - 05
4
M
L
R
2
1
3
7
.05
Adjustment lever for zigzag stitch and needle position
●
The zigzag stitch adjustment lever 1 is
used for adjusting the width of the zigzag
stitch.
●
To change the position of the adjustment
lever, the locking lever 2 must be pressed
against the adjustment lever 1 .
The current zigzag-stitch width
can be seen on scale 3 .
●
By turning the needle-position adjustment
lever 4 the required needle position can be
set.
L = needle-position left
M = needle-position center
R = needle-position right
7
.06
Bobbin thread control
●
When the remaining thread quantity is
reached LED 1 flashes.
After thread trimming a bobbin
symbol appears on the display
with the number of remaining
stitches. To enter the number of
remaining stitches, see Chapter
9.10 Setting the remaining
stitches for the bobbin thread
control.
Fig. 7 - 06
1