Pfaff 2438 plusline, Instruction Manual, Page: 102 / 118

Adjustment
13 - 53
13
.12
Explanation of the error messages
Message Description
E 001 Pedal not in neutral position
E 003 SM 1 (for reference)
E 004 SM 2 (for reference)
E 009 Start inhibitor at standstill
E 010 Incorrect machine class
E 040 Transmitted light sensors
E 045 Bobbin thread monitoring
E 062 Short circuit 24 V
E 063 Overload switch power supply
E 064 Network monitoring
E 065 Extint low in operation
E 066 Short circuit
E 067 Power off
E 068 Extint low in operation
E 069 No increments
E 070 Motor blocking
E 071 No incremental connector
E 072 No set value connector
E 073 Motor running interrupted
E 075 Controller locked
E 092 Start inhibitor when motor running
E 151 System
E 155 Sewing motor
E 156 Time out communication
E 157 Stepping motor ramps