PEUGEOT Tweet, Workshop Manual, Page: 49 / 64

STEERING/FORK
47
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
- Install the following new parts:
• The washer . (6)
• The dust cover (7).
• The fork cone (8).
„ Installing the fork
- Grease the cup bearing races.
- Install 26 balls (9) for the upper cup and 19 balls
for the lower cup.
- Fit the fork into the steering column.
- Install the adjustment cone.
„ Steering system tightening method
- Screw the adjustment cone until it comes into
contact with the balls.
- Tighten the adjustment cone by 2/8 to 3/8 of a turn.
Do not tighten the adjustment cone beyond
the recommended value to avoid damaging
the steering bearings.
- Install and tighten the locknut without altering the
adjustment.
Tightening torque: 20 Nm.
- Check that there is no play in the fork.
- Turn the fork from left to right to check that there are
no tight spots.
- Refit the other items in the reverse order to
disassembly.
7
8
6
9
2/8
3/8