PEUGEOT Tweet, Workshop Manual, Page: 35 / 64

SERVICE OPERATIONS
33
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
50 cc 125/151 cc
- Using the set of feeler gauges, measure the clearance of each valve.
Clearances:
• 0.05
±0.02
mm at the intake.
• 0.10
0.02
mm at the exhaust.
Clearances:
• 0.12
±0.02
mm at the intake.
• 0.12
±0.02
mm at the exhaust.
- If the clearance is not correct, adjust by means
of the cam follower screw.
- Use a wrench to adjust the valve clearance:
Type: Marolotest, P/N 500140.
„ Checking the valve clearance
- At the intake a 0.10 mm feeler gauge
shouldn't go.
- At the exhaust a 0.15 mm feeler gauge
shouldn't go.
- On the contrary, if the fealer gauge goes,
reset the clearances.
- At the intake a 0.15 mm feeler gauge
shouldn't go.
- At the exhaust a 0.15 mm feeler gauge
shouldn't go.
- On the contrary, if the fealer gauge goes,
reset the clearances.