STEERING/FORK
46
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Replacing the bearings of the steering
system
Steering headset cups
If the steering head cups are changed,
the cones and ball bearings must also
be changed.
- Using a drift, remove the steering head cups.
- Using push tool P/N 755039, fit a new upper
cup into the steering tube.
- Using push tool P/N 759788, fit a lower cup
into the steering tube.
Fork cone
- Unscrew and remove the 2 upper screws (4)
from the fork Tee.
- Unscrew the 2 lower screws (5) from the fork
Tee.
- Remove the fork tubes.
- Remove the front mudguard (3 screw).
- Using a drift, remove the steering headset
cone.
- Remove the dust cover.
- Remove the washer.
759788
4
5
Summary of Contents for Tweet
