SERVICE OPERATIONS
25
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SERVICE OPERATIONS
Changing the engine oil
The engine must be drained when
it is warm to allow the oil to run
easier.
Put on protective gloves.
- Place the vehicle on its central stand on flat
ground.
- Remove the engine's oil filler cap (1).
- Remove the drainage cap and its
seal (2) and allow the oil to drip into a
recipient.
- Remove the strainer cap (3) and clean the
strainer.
- Re-install the filter cap fitted with a new seal.
Tightening torque: 15 Nm.
- Insert the drain plug fitted with a new seal.
Tightening torque: 20 Nm.
- Pour the required quantity of oil
corresponding to the manufacturer's
standards into the filler hole.
Quantity: 0.7 l.
- Start the engine and let it run for a short
while.
1
XXXXXX
*XXXXXXXXX*
2
3
Summary of Contents for SPEEDFIGHT 3 RS
Page 1: ...Sales division Technical network leadership WORKSHOP MANUAL ...
Page 2: ......
Page 59: ......
