65
Driving
If the electronic key is not detected or is no
longer in the recognition zone, a message
appears in the instrument panel when closing a
►
T
engine, press the "
START/STOP
" button for
approximately 5 seconds.
In the event of a fault with the electronic key,
workshop.
In the event of an emergency only, the engine
when driving).
►
Press the "
START/STOP
" button for about
5 seconds.
In this case, the steering column locks as soon
as the vehicle stops.
When driving the vehicle, if this warning
lamp and the
STOP
warning lamp come
on, accompanied by an audible signal and the
display of a message, this means that the
parking brake is still applied or has not been fully
released.
Electric parking brake
In automatic mode, this system applies the
At any time, with the engine running:
►
to apply the parking brake,
pull the
control lever;
►
push
the control lever
while pressing the brake pedal.
Automatic mode is activated by default.
Indicator lamp
This indicator lamp comes on on the
instrument panel and on the control lever
accompanied by the display of the message
"Parking brake applied".
release of the parking brake, accompanied
by the display of the message "Parking brake
released".
manual request to apply or release the brake.
In the event of a battery failure, the
electric parking brake will not operate.
As a safety measure, with a manual gearbox,
if the parking brake is not applied, immobilise
the vehicle by engaging a gear.
As a safety measure, with an automatic
gearbox or drive selector, if the parking brake
is not applied, immobilise the vehicle by
placing the supplied chock against one of the
wheels.
workshop.
