TAPE MODE OPERATION
1.
COMPUTER CONTROL
The insertion of a cassette with the radio "on" will auto-
matically switch the unit from the "radio"
to
the "tape"
mode.
The display will indicate program
"1"
if
the top side of
the cassette is playing and program "2" if the bottom
side is playing.
Regardless of which side is playing, the computer logic
will automatically select the proper direction for "fast for-
ward" or "rewind."
CAUTION:
Allow the vehicle interior to cool (or heat up) to normal
temperatures BEFORE inserting a cassette.
The level of inherent ''HISS' in cassette tape is reduced
by encoding the tape with Dolby' noise reduction. Use
of the Dolby button with non-Dolby' encoded tapes will
reduce high frequency response. Use of Dolby encoded
tapes without the Dolby function will result in an artificial
intensification of high frequencies. This unit is designed
to operate properly with both non-Dolby' or Dolby
B *
encoded tapes.
3. TAPE "SEEK"
If you wish to hear the next tape selection. press the
">
seek" button.
If
you wish
to hear the current selec-
tion again, press the
''<
seek" button.
Tape selections can be "scanned" by pressing the
volume control. The tape will fast forward only to the
2.
DOLBY B NOISE REDUCTION
4.
TAPE "SCAN"
10
5.
6.
beginning of each selection. The selection will play for
seven seconds and then fast forward
to the next selec-
tion, etc. To stop "scanning," press the volume control
again.Tape Scan does not work in the"rewind" direction.
NOTE:
In order for the tape "seek" and "scan" functions
to
operate properly, ihere must be at least 3 seconds of
silence between musical selections.
Seek and Scan will not function properly
if:
A. Excessive record noise or hum is present between
home recorded tape selections.
B. Sound programs are intermittent, such as lectures,
news broadcasts, or music selections with more than
3 seconds of silence between passages.
TAPE EQUALIZATION
The computer automatically selects the proper tape
equalization:
Normal tapes-120µsec--"MTL"
in display "OFF:
Chrome, metal-70µsec-"MTL" in display
"ON:'
TAPE PAUSE
without requiring the tape to be reinserted again as
required on units without this feature.
When the ignition is again turned on, the tape will again
begin playing.
Summary of Contents for B80911641A
Page 1: ...PEUGEOT Anti Theft Radio Manual ...
Page 15: ...NOTES 13 ...