ANTI-THEFT CODE ENTRY
1. When
“code”
appears in the display, the
5
digit “anti-theft code” printed on the two “anti-theft
code” radio identification cards must be entered using the radio pushbuttons numbered 1
to 5.
a. If a “beep”
is
heard while entering the 5 digit code, STOP. Begin the code entry again.
b.
If
an error is made in code entry, repeatedly press any of the 5 pushbuttons until a “beep” is
heard, then
STOP .
Begin the code entry again.
NOTE: If the assigned “anti-theft code” is not entered in three successive tries, the micropro-
cessor will not accept any more code entries unless it is allowed to continuously remain on for
one hour. After one hour
of “on” time, it will again accept only three additional tries and this
process will repeat itself.
2. Remove both code cards from this manual. Place one in the primary driver’s wallet, and one with
the title papers to ensure that the next owner receives the “anti-theft code” cards if the vehicle
is subsequently sold.
DO
NOT LEAVE THE CODE CARDS IN THE VEHICLE.
3. In the event electrical repairs to your vehicle become necessary, you may wish to give the “anti-
theft code” to the repairing facility to enable them to reprogram your radio.
4.
If
the “anti-theft” radio identification cards are lost, etc., contact a Peugeot dealer
of your
choice. You may be charged for labor to remove and reinstall the radio
to ascertain the radio
serial number.
5
Summary of Contents for B80911641A
Page 1: ...PEUGEOT Anti Theft Radio Manual ...
Page 15: ...NOTES 13 ...