140
Practical information
301_en_Chap09_info-pratiques_ed01-2014
Changing bulbs
These bulbs are changed from inside the boot:
F
open the boot,
F
remove the access grille from the
corresponding side trim panel,
F
slacken and remove the nut,
F
disconnect the lamp unit connector,
F
unclip the lamp unit by lowering the tongue
and carefully extract it pulling in line
towards the outside,
F
remove the four screws and lift off the bulb
holder,
F
turn the failed bulb a quarter of a turn and
change it.
To refit, carry out these operations in reverse
order.
Take care to engage the lamp unit in its guides,
while keeping it in line with the vehicle.
Tighten sufficiently to ensure sealing, but
without damaging the lamp.
1.
Brake lamps / sidelamps (P21/5W).
2.
Direction indicators (PY21W amber).
3.
Reversing lamps (R10W).
4.
Foglamp (P21W).
Rear lamps
Summary of Contents for 301
