PEUGEOT 301, Handbook

Page: 88 / 285

86
Visibility
301_en_Chap06_visibilite_ed01-2014
Headlamp adjustment
To avoid causing a nuisance to other road users, the headlamp beams should be adjusted
according to the load in the vehicle.
This adjustment can be carried out using the control located:
-
under the bonnet,
- below and to the left of the steering wheel (depending on version).
The initial setting is position "0" .
0 1 or 2 people in the front seats.
- 5 people.
1 5 maximum authorised load in
the boot.
- maximum authorised load in
the boot.
The higher number positions can be used,
but may limit the area illuminated by the
headlamps.
Under the bonnet
F
Raise the bonnet for access to the control
(one per headlamp).
F
Turn the control to adjust the height of the
headlamp beam.
Travelling abroad
The design of the dipped beam
headlamps allows, without modification,
driving in a country that drives on the
other side of the road to the country in
which your vehicle was sold.
To the left of the steering wheel