PEUGEOT 301 Handbook Download Page 198

Page: 198 / 285

BACK

196

301_en_Chap12a_RD5(RD45)_ed01-2014

USING THE TELEPHONE

To display the "

TELEPHONE

" menu:

Make a long press on

SRC/TEL

Or, press the dial to display the
contextual menu. Select "

Call

" and

confirm.

Or, press

MENU

, select

Telephone

" and confirm. Select

Call

" and confirm.

Select "

Directory

" and confirm.

An incoming call is announced by a ring and a superimposed display
in the multifunction screen.

Mobile
(depending on the information
available in the contact records of
the telephone connected).

YES

" to accept the call is selected by

default.
Press the control knob to accept the
call.
Select "

" and confirm to reject the

call.

Making a call - From the directory of contacts

Select a contact then confirm.

Receiving a call

Select the number and confirm.

A long press on

BACK

or on

SCR/TEL

also rejects an incoming call.

Business

Home

Press one of these buttons to accept
the call.

Summary of Contents for 301






























































































































































































































































































Search results

Summary of Contents for 301

Reviews:

Related manuals for 301

Brands by name

Popular brands

PEUGEOT 301, Handbook

Search results

Summary of Contents for 301

Reviews:

Related manuals for 301

Brands by name

Popular brands