PEUGEOT 301, Handbook

Page: 71 / 285

69
5
Driving
301_en_Chap05_conduite_ed01-2014
AUTO and - appear in the instrument
panel.
F
Select position N .
F
Press the brake pedal.
F
Wait for around 30 seconds until N or a
gear appears in the instrument panel.
F
Move the gear lever to position A , then to
position N .
F
With your foot still on the brake pedal, start
the engine.
The gearbox is operational again.
Reinitialisation
Following disconnection of the battery, it is
necessary to reinitialise the gearbox.
F
Switch on the ignition.
Before doing anything under the
bonnet, ensure that the gear lever is in
neutral (position
N ) and that the parking
brake is applied.
In exceptional circumstances, the
gearbox may need an automatic
reinitialisation: starting and gear
changing are no longer possible.
AUTO and - appear in the
instrument panel.
For all parking situations, you must
apply the parking brake to immobilise
the vehicle.
When immobilising the vehicle with the
engine running, you must put the gear
lever into neutral (position
N ).
Before switching off the engine:
-
change to position N to be in neutral,
or
-
leave the vehicle in gear; in this case the
vehicle cannot be moved.
Follow the procedure described above.
Stopping the vehicle
With the ignition on, if this warning
lamp comes on and
AUTO
flashes, accompanied by an audible signal and
a message in the multifunction screen, this
indicates a gearbox fault.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
Operating fault