background image

 

GUARANTEE 
This product is guaranteed against defects in material and workmanship for a period of one year from the date of purchase. In 
order for the guarantee to be granted, a proof of purchase (normally the original invoice/receipt) is required and the serial 
number label must not be removed from the product. Pettersson Elektronik will repair or replace the product if it proves to be 
defective during the guarantee period, provided it is returned to us. No other guarantee is expressed or implied.  
 
This product does not contain any user-serviceable parts. Do not open it and always refer servicing to the manufacturer or any 
other party approved by the manufacturer.  
 
The guarantee covers none of the following: 

 

1. Damage to the product resulting from abuse and misuse, including but not limited to (a) the failure to use this product for 
its  normal  purpose  or  in  accordance  with  Pettersson  Elektronik’s  instructions  on  the  proper  use  and  maintenance  of  this 
product and (b) the installation or the use of this product in a manner inconsistent with the technical or safety standards in 
force in the country where the product is used. 

 

2. Damage to the product resulting from non-authorized modifications made to the product.  

 

3. Repairs done by non-authorized technicians. 

 

4. Accidents or similar causes beyond the control of Pettersson Elektronik, including but not limited to lightning, water, fire 
and public disturbances. 

 
LIMITATION OF LIABILITIES 
In no event shall Pettersson Elektronik be liable for any special, incidental or consequential damages of any nature including, 
but not limited to, damages resulting from loss of profit or revenue, recall costs, claims for service interruptions or failure to 
supply downtime, testing, installation or removal costs, costs of substitute products, property damage, personal injury, death 
or legal expenses. The customer's recovery from Pettersson Elektronik for any claim shall not exceed the purchase price paid 
by the customer for the goods, irrespective of the nature of the claim, whether in warrant, contract or otherwise. The customer 
shall indemnify, defend and hold Pettersson Elektronik harmless from any claims brought by any party regarding products 
supplied by Pettersson Elektronik and incorporated into the customer’s product.  

 

Pettersson Elektronik assumes no responsibility for any damage or loss resulting from the use of this manual. 

 

Pettersson Elektronik assumes no responsibility for any loss or claims by third parties which may arise through the use of the 
D1000X. 

 

Pettersson Elektronik assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, 
repairs or battery replacement. Be sure to back up all important data on other media to protect against its loss. 

 

PRODUCT SAFETY NOTICE AND RESTRICTIONS 
This product is intended for commercial use only. Products sold by Pettersson Elektronik are not designed, intended or 
authorized for use in life support, life sustaining, human implantable, nuclear facilities, flight control systems, or other 
applications in which the failure of such products could result in personal injury, loss of life or catastrophic property damage. 
If the customer uses or sells the products for use in any such applications: (1) the customer acknowledges that such use or 
sale is at the customer's sole risk; (2) the customer agrees that Pettersson Elektronik is not liable, in whole or in part, for any 
claim or damage arising from such use; and (3) the customer agrees to indemnify, defend and hold Pettersson Elektronik 
harmless from and against any and all claims, damages, losses, costs, expenses and liabilities arising out of or in connection 
with such use or sale. 
 
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of 
the FCC  Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment 
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required 
to correct the interference at his own expense. Modifications not expressly approved by the manufacturer could void the 
user's authority to operate the equipment under FCC rules. 
 
Windows is a registered trademark of Microsoft Corporation. 
 
CompactFlash is a registered trademark of SanDisk Corporation. 
 
Other company, product and service names mentioned in this manual, may be trademarks of others.

 

 

 

©

 

Pettersson Elektronik AB, 2005-2018  

 

 

 

      May 2018

Summary of Contents for D1000X













































Reviews: