18 1-800-732-2677
www.petsafe.net 19
Add-A-Dog
®
/ Programming Additional Receiver Collars
To add multiple dogs to your system, first charge the additional Receiver Collars. Attach the new Receiver
Collar to the Receiver Mounting Bracket and Receiver Handle. Turn ON the BPU and plug the BPU cable into
the Receiver Collar. Walk to your Reference Point in your yard. The arrow on the Receiver Collar mounting
bracket must be pointing AWAY from the Transmitter. Move the BPU cursor to the ADD-A-DOG position,
press OK, and follow the BPU directions. Once you receive the message that programming is complete,
disconnect the Receiver Collar, turn OFF the BPU and verify that the Receiver Collar is operating properly
with the Warning Zone and Static Correction Areas.
You may program an unlimited number of Receiver Collars using this same boundary. If you’d like to set-up a
unique boundary for another pet you will need to refer to your PetSafe
®
Wireless Mapping Fence Operating
and Training Guide for complete system instructions. Please keep the following in mind:
1. Once you program a second boundary, the previous boundary will no longer remain in the Boundary
Programming Unit, but the previously programmed collars will retain the initial boundary. If you want
to retain both boundaries, contact the Customer Care Center to purchase an additional Boundary
Programming Unit.
2. You will not be able to move the Transmitter as this will affect the set-up for the previously programmed
collars.
3. Follow all of the same programming guidelines as the previously programmed collars. The Boundary
MUST go CLOCKWISE. The Arrow on the Receiver Collar mounting bracket must point AWAY from the
Transmitter, the PetSafe
®
logo MUST face the dog’s chin.
4. If you have multiple boundaries, you must be able to identify which pet should be wearing the
appropriate Receiver Collar for their intended boundary.
Step
4
Summary of Contents for PIF00-13652
Page 2: ...2 1 800 732 2677...
Page 35: ...www petsafe net 35...
