14 1-800-732-2677
www.petsafe.net 15
Set the Static Correction Level
The Static Correction Level can be changed by two methods.
Set Static Correction Level Using Receiver Collar
1. Press the Receiver Collar Mode Button briefly when the unit is turned ON. The indicator light will light red
when the button is pressed.
2. Release the Mode button. The Receiver Collar will flash the red indicating the Correction Level by the
number of times the indicator flashes (See Function and Response Table below).
3. To change the Static Correction Level, press and release the Mode button within 5 seconds of the last
red flash. The Static Correction Level will then increase one level and report the new level by flashing
the number of times again. Note: set the Static Correction Level to Level 1 (tone only) for the first day of
training.
4. Repeat pressing the Mode button until the desired static correction level is achieved.
Set Static Correction Level Using BPU
1. Connect the Receiver Collar to the BPU.
2. Power on the Boundary Programming Unit.
3. From the Main Menu, use the arrow keys to navigate to System Setting | Receiver Settings.
4. Under Correction Level, choose the desired static correction level. Note: set the Static Correction Level to
Level 1 (tone only) for the first day of training.
Function and Response Table
Indicator Light Response
Static Correction Level
Receiver Collar Function
Dog Temperament
1 Red Flash
1
No Static Correction, Tone Only
Initial Training Mode
2 Red Flashes
2
Low Static Correction
Timid
3 Red Flashes
3
Medium-Low Static Correction
Timid or Average
4 Red Flashes
4
Medium Static Correction
Average Energy
5 Red Flashes
5
Medium-High Static Correction
Average or High Energy
6 Red Flashes
6
High Static Correction
High Energy
Summary of Contents for PIF00-13652
Page 2: ...2 1 800 732 2677...
Page 35: ...www petsafe net 35...
