background image

 16 

Customer Care Center 1-800-732-2677

+2 Boost

Pressing the +2 Boost Button (Red) sends a signal to the Receiver Collar to issue a Vibration that is 2 levels 
higher than the currently selected level. For example, if the Vibration Level is set at Level 2 Low, pressing the 
+2 Boost Button will stimulate at Level 4 Low. Note: The system can not exceed the 8 High Vibration Level.

Dog training recommendations

When Training Begins: Training starts the moment you bring your puppy home. While your dog will not be 
ready for the PetSafe

®

 products until he has matured, you should begin basic training immediately. 

Remain the Leader: Stop your dog from becoming “collar wise”. An easy solution known as “Collar 
Conditioning” will help prevent the dog from listening only when wearing the Receiver Collar and disobeying 
when he is not wearing it. First, fit the Receiver Collar on your dog. Second, immediately take your dog outside 
or do something he enjoys; don’t activate the Receiver Collar. Let the dog wear it during non-training sessions. 
Your dog should believe wearing the Receiver Collar can also result in having fun. It should not be perceived as 
punishment. Place the Receiver Collar on and off the dog at various times for short or longer periods to make 
wearing it a normal routine. Similarly, don’t let the dog learn to obey only when he sees the Handheld Remote. 
Also carry the Handheld Remote, but don’t use it all the time. How long should this process take? Professional 
trainers’ opinions vary from a few days to a couple of weeks. 
Focus on the Dog: Professional trainers’ opinions vary on some issues, but all users of remote training 
systems strongly recommend watching your dog, not the Handheld Remote, when training. PetSafe

®

 products 

are specifically designed to make this task simple. It is easy and you should find the point where your dog first 
perceives the Vibration. See “Find the Best Vibration Level for Your Pet”.
“Good Dog” in the Home or Outside: Stopping unwanted behavior is easy using the PetSafe

®

 Remote 

Trainers. Your dog can be good in and out of the house. Remember to be fair to the dog and remove 
temptation whenever possible. 
Be Consistent and Responsible: Use the Remote Trainer every time your dog misbehaves. Only let 
responsible family members use the Remote Trainer. It is not a toy!
Learn how to use your PetSafe

®

 Remote Trainer to teach your dog the following basic commands:

•  Sit
•  Come
•  Stay
And eliminate the following unwanted behaviors:
•  Jumping Up
•  Digging
•  Chasing
•  Trash Raiding

Summary of Contents for PDT00-14678





























Reviews: