10
Customer Care Center 1-800-732-2677
www.petsafe.net 11
Receiver Collar LED – Function and Response
Receiver Collar Function
Green LED Response
Power on
Flashes once and beeps low to high
Normal operation - Good battery
1 flash every 5 seconds
Training Tone
On length of button press
Pairing Complete
Flashes 5 times
Receiver Collar Function
Red LED Response
Power off
On for 3 seconds
Normal operation - Low battery
3 flashes every 5 seconds
Vibration
On length of button press
STEP 3
fit the receiver Collar
Important: The proper fit and placement of your Receiver Collar is important for
effective operation. The Vibration Points must have direct contact with your dog’s
skin on the underside of his neck.
To assure a proper fit, please follow these steps:
1. Make sure that the Receiver Collar is turned off.
2. Start with your dog standing comfortably (
3A).
3. Place the Receiver Collar on your dog’s neck close to the ears.
Center the Vibration Points underneath your dog’s neck, touching
the skin (
3B). Note: It is sometimes necessary to trim the hair around
the Vibration Points to make sure that contact is consistent.
Do not shave the pet’s neck as this may increase the
risk of skin irritation.
4. Check the tightness of the Receiver Collar by inserting one finger
between the collar and your dog’s neck (
3C). The fit should be snug
but not constricting.
5. Allow your dog to wear the Receiver Collar for several minutes
then recheck the fit. Check the fit again as your dog becomes
more comfortable with the Receiver Collar.
3A
3B
3C
