4
1-800-732-2677
• Avoid damaging the insulation of the loop wire; damage may cause areas of weak signal and lead to failure
of the boundary.
• Use care when mowing or trimming your grass not to cut the loop wire.
• Plug the surge protector into a grounded (3-prong) outlet that is within 5 ft. of the fence transmitter. ALWAYS
use a grounded (3-prong) outlet to ensure maximum protection.
• Do not remove the ground prong from the surge protector plug. Do not use a 3-prong plug to 2-prong outlet
converter. Doing so will make the surge protector ineffective against surges or spikes.
• Verify that the boundary loop and transmitter wires connect to the proper surge protector terminals. Reversed
connections will result in an increased risk of surge related damage.
• For added protection, when unused for long periods of time or prior to thunderstorms, unplug from the wall
outlet and disconnect the loop boundary wires. This will prevent damage to the transmitter due to surges.
Table of Contents
In the Box ................................................................................................................................................................................ 5
You May Also Need .............................................................................................................................................................. 5
How the System Works ......................................................................................................................................................... 5
Key Definitions ....................................................................................................................................................................... 6
Step 1: Have Your Utilities Marked ..................................................................................................................................... 7
Step 2: Install the Surge Protector and Transmitter ............................................................................................................ 7
Step 3: Design Your Boundary Zone ................................................................................................................................... 9
Step 4: Position, Twist and Splice the Boundary Wire ....................................................................................................12
Step 5: Connect the Wires ..................................................................................................................................................13
Step 6: Prepare the Receiver Collar ..................................................................................................................................14
Step 7: Set the Boundary Width and Test the Receiver Collar .......................................................................................16
Step 8: Bury the Boundary Wire ........................................................................................................................................18
Step 9: Place the Boundary Flags ......................................................................................................................................19
Step 10: Fit the Receiver Collar ..........................................................................................................................................20
Training ..................................................................................................................................................................................21
System Test ............................................................................................................................................................................23
Wire Break Location Test ....................................................................................................................................................24
Troubleshooting ...................................................................................................................................................................25
Terms of Use and Limitation of Liability ............................................................................................................................26
Compliance ..........................................................................................................................................................................27
Perchlorate Battery ..............................................................................................................................................................27
Battery Disposal ...................................................................................................................................................................27
Important Recycling Advice ...............................................................................................................................................27
Warranty ...............................................................................................................................................................................27
Mounting Template ..............................................................................................................................................................28
