background image

22

1-800-732-2677

Days 9–30

Once your pet consistently respects the boundary 

regardless of distractions or temptations, he is ready for 

the next step: unleashed supervision (

11D

). Stay close 

by with a leash at hand. Play with your pet for a while 

during the first few sessions. If your dog does not try to 

cross the boundary, occupy yourself with another task 

in the yard, and allow him to freely explore. Continue 

watching your pet. If he escapes, remove the collar and 

lead him back into the pet area. Start these sessions 

at about 15 minutes and gradually work up to an hour 

or more.
When your pet proves trustworthy, you can let him out 

on his own. Continue to check on him regularly. You 

can remove every other boundary flag every 4 days 

until all the flags are removed. Save them in case you 

move or need to train another pet.

Taking Your Pet Out of the Pet Area

Important:

 

Remove the receiver collar and leave it at home.

Once your pet learns the boundary, he will be reluctant to cross it for 

walks or car rides. 

Option 1:

Replace the receiver collar with a regular collar. Put your pet in a car 

that is within the pet area and drive him out of the pet area.

Option 2:

Replace the receiver collar with a regular collar and leash. Walk your 

pet out of the pet area while giving a command such as “OK” at a 

specific place along the boundary (the end of your driveway, sidewalk, 

etc.). Always leave the pet area from the same spot in your yard with a 

leash and your pet will associate leaving the pet area only on a leash, 

only at this spot, and only with a person. You may initially need to 

convince your pet to leave the pet area with a treat and lots of praise.

Note:

 

You may also carry your pet out of the pet area.

Congratulations!

You have now completed the training program. You are both ready to enjoy more freedom. Just make sure to 

continue to check the tightness of the receiver collar and remove it when it is not in use.

11D

Summary of Contents for Basic In-Ground Fence PIG00-14582





























Reviews: