Peterbilt 365 2017 Manual Download Page 33

Page: 33 / 228

SEATS AND RESTRAINTS

While seated appropriately, push
the “on” button to engage the
Komfort-Latch®.

Learn forward in the seat until you
hear a “click.”

Return to normal driving position,
and the Komfort-Latch® maintains
the preset amount of tension relief.

To disengage the mechanism:

Unbuckle the seat belt.

Press the “OFF” button of the
Komfort-Latch® or tug on the
shoulder strap.

Komfort-Latch®

More information and video
tutorials can be found at:
www.clicktugsnug.com

WARNING!

Do not set the Komfort-Latch® with
too much slack.

Too much slack

may reduce the effectiveness of the
seat belt. Failure to comply may re-
sult in death or personal injury.

(03/17)

Y53-6076-1B1

1-25

https://www.besttruckmanuals.com/

Summary of Contents for 365 2017





































































































































































































































Search results

Summary of Contents for 365 2017

Reviews:

Related manuals for 365 2017

Brands by name

Popular brands

Peterbilt 365 2017, Manual

Search results

Summary of Contents for 365 2017

Reviews:

Related manuals for 365 2017

Brands by name

Popular brands