Peterbilt 365 2017 Manual Download Page 150 | Manualshive

Page: 150 / 228

background image

HEATING AND AIR CONDITIONING

How To Use The System

The engine must be running for the
heater and air conditioner to generate
hot and cold air.

To Cool

Push the Fresh
Air/Recirculation Switch to the
Fresh Air mode (Blue indicator
light off). Manually setting the
system to recirculate air will
increase the effectiveness and
uses the least amount of fuel.

Turn ON the Fan Control Dial to
the desired fan speed.

Turn Temperature Dial to Desired Setting.

Turn the Air Flow Control Dial
to Dash Vents.

If the outside air is not cold
enough to cool the cab, press to
engage the compressor which
will deliver colder air.

For more cooling effect, you
may need to press the switch
back to recirculation mode.

To Heat

Turn the Fan Control Dial ON to
the desired fan speed.

Turn the Air Flow Control Dial
to Floor Vents.

Adjust the Temperature Control Dial
clockwise until the air temperature
feels comfortable.

Using this function in "manual" mode
will provide the maximum heating
performance.

To Dehumidify

Push the Fresh Air/Recirculate
Switch to the Fresh Air mode
(Blue indicator light off).

Turn ON the Air Conditioning
Switch (Blue indicator light on).

3-78

Y53-6076-1B1

(03/17)

3

https://www.besttruckmanuals.com/

«
...
148
149
150
151
152
...
»

Summary of Contents for 365 2017





































































































































































































































Reviews:

No comments

Related manuals for 365 2017

1949-50-51 F-Series Truck

Brand: Ford Pages: 30

Brand: Trane Pages: 40

Brand: Aero Pages: 30

Brand: Still Pages: 140

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands