Peterbilt 365 2017 Manual Download

Page: 31 / 228

SEATS AND RESTRAINTS

Safety Restraint Belts

Lap Belt

Shoulder Belt

Correct

Incorrect (too high on hips)

Correct (over arm)

Incorrect (under

arm)

Incorrect (twisted)

WARNING!

Proper seat belt adjustment and use
is important to maximize occupant
safety.

Failure to wear or adjust

the safety belt properly may result in
death or personal injury.

Tether Belts

This vehicle may have an external
tether belt installed with a seat, instead
of the internal tethering device. Tether
belts are designed to restrain the seat
in the event of a sudden stop or an
accident.

Internal tether belts do not require
adjustment.

(03/17)

Y53-6076-1B1

1-23

https://www.besttruckmanuals.com/

Summary of Contents for 365 2017





































































































































































































































Search results

Summary of Contents for 365 2017

Reviews:

Related manuals for 365 2017

Brands by name

Popular brands

Peterbilt 365 2017, Manual

Search results

Summary of Contents for 365 2017

Reviews:

Related manuals for 365 2017

Brands by name

Popular brands