Peterbilt 365 2017, Manual

Page: 138 / 228

SWITCHES
WARNING!
After you complete a turn, shut the
system off by returning the lever to
the “OFF” (center) position. Failure
to shut off a turn signal could con-
fuse other drivers and result in an
injury accident. An indicator light in
the instrument panel will flash until
the turn signal is turned off.
High Beam
NOTE
The headlights must be ON for the
high beam switch to operate.
•
To switch your headlights to lower
or higher beam, gently pull the turn
signal lever, toward the steering
wheel, until you hear the switch
click and the beam changes.
The blue indicator light in the
instrument panel will be ON when
the high beam is being used.
•
To return to previous beam: pull
the lever towards the steering
wheel again.
•
The high beams can be
momentarily flashed with or
without the headlights being on.
To flash the high beams, gently
push the headlight lever away from
the steering wheel to momentarily
turn on the lights.
NOTE
Continued pressing of the high
beam flash will not keep the high
beams on.
Marker and Clearance Lights Flash
3-66
Y53-6076-1B1 (03/17)
3
https://www.besttruckmanuals.com/