Peterbilt 220, Operator'S Manual

Page: 22 / 136

7. Fit a new poly-V belt between the fan
and wind tunnel collar. Place the poly-
V belt over as many pulleys as
possible.
8. Tension the automatic belt tensioner
and place the poly-V belt over the
remaining pulleys. Carefully allow the
automatic belt tensioner to spring back
against the new poly-V belt.
9. Check that the poly-V belt is in all
pulley grooves.
10. Connect the earth lead to the battery.
Replacing the Fuel Line
Filter
WARNING
When removing the fuel line filter, a
quantity of fuel will escape. Collect the
fuel and avoid the risk of fire.
Dirt in the fuel system can lead to signifi-
cant damage to the fuel system.
Diesel fuel is toxic and can therefore
have a damaging effect on your health.
Any direct or indirect physical contact
should therefore be avoided.
In the event of contact with the skin: re-
move with paper or a cloth, wash with
soap and water. If irritation persists, con-
sult a doctor.
If swallowed: do NOT induce vomiting.
Rinse the mouth, drink two glasses of
water and see a doctor.
In the event of inhalation: get some
fresh air and rest.
Removing the Fuel Filter
1. Place a receptacle under the filter.
2. Remove the filter by turning it anti-
clockwise.
NOTE
The fuel line filter is a disposable filter
and, therefore, may not be cleaned
and reused.
EMERGENCY - Replacing the Fuel Line Filter
20 Y53-6078-1B1 (12/18/18)
2