manualshive.com logo in svg

Peterbilt 220, Operator'S Manual

Share
Download
Peterbilt 220 Operator'S Manual Download Page 85

The Average fuel consumption graph
provides feedback by changing color.

•

The graph is green if the average
is below target.

•

The graph is red if the average is
over target.

How to Turn Off Driver Performance
Assistant

To turn off the DPA:

1. Using the Menu Control Switch

(MCS), turn to 

ECO settings

 and

select.

2. Turn the MCS and select 

Coaching

.

3. Push the MCS to open the 

on/off

option.

4. Select 

off

.

The DPA feedback can be switched off
as long as the vehicle ignition stays
on. When the ignition is switched off
and then back on, the DPA feedback
is again active.

Fuel Consumption

The 

Driving support

 menu displays

relevant information about the fuel
consumption and vehicle usage.

Set a fuel consumption target to improve
the fuel economy. The fuel consumption
display consists of two screens:

•

Fuel
consumption
screen

This screen is
part of the

Economic
driving

submenu.

•

Trip info
screen

This screen is part
of the main menu on
the display.

For more information about improving fuel
economy without sacrificing vehicle
performance, see 

Driving Style

 on page

81 .

DRIVING - Driving Style

Y53-6078-1B1 (12/18/18)

83

4

Summary of Contents for 220









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands