Peterbilt 220, Operator'S Manual

Page: 29 / 136

Direction Indicator
1. Tilt the cab forwards.
2. Detach the plug from the rear of the
bulb holder (3).
3. Screw the bulb holder anti-clockwise
out of the headlamp unit.
4. Pull the bulb carefully out of the bulb
holder.
Rear Lights
1. Unscrew the four Philips screws and
remove the lens cap.
1. Reversing light
2. Stop light
3. Rear light
4. Direction indicator
Direction Indicators
1. Detach the plug on the inside bumper
end cap/step molding.
2. Remove the two screws and detach
the lamp unit of the direction indicator.
3. Unscrew the bulb holder anti-
clockwise out of the indicator lamp
unit.
4. Pull the bulb carefully out of the bulb
holder.
Stepwell Lighting
1. Remove the stepwell lighting housing
from the bottom of the door by
inserting a screwdriver in the notch.
2. If necessary, remove the plug.
3. Unscrew the bulb holder anti-
clockwise out of the stepwell lighting
housing.
4. Pull the bulb carefully out of the bulb
holder.
Roof Light
The transparent covers of the roof lights
have a slot allowing the lens to be tilted out
of the housing using a screwdriver.
1. Remove the transparent cover of the
roof light carefully from the roof
upholstery.
2. Pull the bulb carefully out of the bulb
holder.
EMERGENCY - Replacing Bulbs
Y53-6078-1B1 (12/18/18) 27
2