manualshive.com logo in svg

Peterbilt 220, Operator'S Manual

Share
Download
Peterbilt 220 Operator'S Manual Download Page 51

Layout of Master Display

1. Interactive and dialogue area.
2. Indication bar.
3. Driver Performance Assistant (DPA)

status bar.

4. Symbols of selected menu. See

section 

Menu Overview

 on page 52 .

5. Menu title. If selected via the Menu

Control Switch (MCS) or the Steering
Wheel Switches (SWS).

6. Warning Indicators. See section 

Warning Indicators on Master Display

.

7. Scroll function available.

Depending on the displayed
information, the background color of
the screen is:

•

Red (danger).

These messages show information that
requires immediate actions by the driver
and they cannot be suppressed.

•

Yellow (warning).

These messages show information that
requires action as soon as possible and
they can be suppressed.

•

Blue (settings).

These messages show information about
settings and the values of these settings.

•

Grey (information).

These messages show information about
the status (engaged or disengaged) of
systems.

•

Green (Driver Performance
Assistant).

These messages show information about
the driver performance.

Start-Up Phase

If the ignition has been switched on and
the engine is not yet running, the start –up
screen is shown in the master display.

On the start –up, the logo appears in the
master display and the following warning
indicators on the instrument panel light up:

•

MIL (yellow)

•

Retarder (green)

•

Park brake (red)

•

Low brake performance (red)

•

Truck EBS (yellow)

•

Airbag (yellow)

Approximately 3 seconds after switching
on the ignition, all warning indicators
disappear except the park brake warning
and those indicating a malfunction. At the
same time, the Driver Performance
Assistant (DPA) status bar appears in the
master display.

CONTROLS - Master Display

Y53-6078-1B1 (12/18/18)

49

3

Summary of Contents for 220









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands