background image

VC II 230/400-3...15

5

5.

EC Declaration of Conformity

 

EC Declaration of Conformity  

 
 
 
 

 

 

  
Name 

Address:  

  Peter 

Electronic 

GmbH 

Co.KG 

 

 

 

 

 

Bruckäcker 9 

     92348 

Berg

Germany

 

 

hereby declares that the following product (device, component, unit) in the version as supplied

 

 

 

 

Product designation:  

 

Combined Motor Start and Braking Device

 

 

Serien / type designation:

  

VC II 230/400-3…15 

Article 

group: 

   2612…, 

2613…, 

2615… 

Year of manufacture: 

 

 

 

2004 

 
complies with the provisions of the following EC-directives: 

 

 

2004/108/EG

  concerning 

Electromagnetic compatibility

 

and

  2006/95/EG

  concerning 

Electrical equipment designed for use within

 

certain voltage limits

 

 
 

The following harmonized standards have been applied:

 

 
 
EN 60947-1:   Low-voltage switchgear and  
2008  

controlgear
General rules

 

 

EN 60947-4-2:   Low-voltage switchgear and

 

2007 controlgear 

 

 

Contactors and motor-starters -

 

 

AC semiconductor motor 

 

 

controllers and starters

 

 
 
 
 
 
This EC Decleration of Conformity is no longer valid, if the products is modified or changed

 

without our agreement.

 

This declaration is issued under the sole responsibility of the signatory.

 

 
 
 
 

 
 

Berg, 05.08.2009     Dr. Thomas Stiller, Managing Director                            

(place, date)

 

 

 (signatory and function of the signatory)

 

 

(signature)

 

The manufacturer / company placing the product on the market 
(authorized representatives of the manufacturer / companies placing the product on the market 
that are established within the Community) 

Summary of Contents for VersiComb II 230-3



























Reviews: